-
09-05-2014 #1
The Box
The pallet it's on is 4' x 4'
It was nailed and bolted together with speed bolts.
The top off
The exhaust pipe is squished ... the bag contains leads manuals software etc...
A couple more sides off ...
I opened it up to take out the extras.
The air compressor
The water pump
The rotary table (4th axis)
This reduced the weight a bit
Once in the workshop, the tube compartment ... stuffed with air pocket packing
And the tube ... still in one piece :)
That all the photo's for now.
I'll get it into a suitable position tomorrow and set about commissioning it
More photos obviously.
Over all I'm very impressed with the build quality , considering it's half priced and Chinese !
The cabinet is well made, powder coated and fits well together.
All the catches and hinges work as they should.
It looks the job !
Happy so far :D
-
09-05-2014 #2
That looks very nice, great value too. Perhaps when you get it set up you can come up here and set mine up!!! Good luck. G.
-
09-05-2014 #3
Thanks G
I'll put on here how I get on.
From what I've read, your corner problem is common for 'beginners'
The laser power for cutting at full speed, is obviously more than is needed when it slows down for the corners ... I have no idea how to solve that ... A.T.M. I just know it needs solving :)
-
The Following User Says Thank You to Want2build1 For This Useful Post:
-
09-05-2014 #4
Looking good so far, thanks for sharing!
.Me.Me
-
10-05-2014 #5
-
10-05-2014 #6
-
10-05-2014 #7
-
10-05-2014 #8
-
10-05-2014 #9
...........
Last edited by Want2build1; 10-05-2014 at 05:16 PM. Reason: video didn't work :(
-
13-05-2014 #10
How's the laser going ? I would love to know how your getting on with it. When you get going fully test some acrylic 6mm and over and see if it does the edge cut at 90* I ask because a guy who spent £7.5k on a 1200x900 laser told me they cut at a slight angle and not 90* So keep the pics coming and the video please.
Mike
Thread Information
Users Browsing this Thread
There are currently 3 users browsing this thread. (0 members and 3 guests)
Similar Threads
-
Laser Machine Grounding/Earthing
By Want2build1 in forum Laser Machines & BuildingReplies: 31Last Post: 09-02-2015, 10:18 PM -
Laser Machine Eye protection
By Want2build1 in forum Laser Machines & BuildingReplies: 11Last Post: 19-05-2014, 01:46 PM -
How to save laser machine cost
By Zoe Zhang in forum Manufacturer NewsReplies: 0Last Post: 06-09-2012, 03:41 AM -
Chinese CNC machine modifications - Discussion
By craigrobbo in forum Milling Machines, Builds & ConversionsReplies: 2Last Post: 14-05-2012, 06:51 PM -
WANTED: GCc Laser Pro or Epilog Laser Cutter Machine
By Brownhills school in forum Items WantedReplies: 1Last Post: 10-05-2012, 04:30 PM
Bookmarks