. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Hi all

    I have been lurking here on and off, it is refreshing to find a site that is not focused on the US CNC experience. My last visit prompted me to stay a while after finding EddyCurrents build thread and his amazing safety circuit within.

    I have had a DIY CNC in one guise or another for the past couple of years. I started with an MDF machine, which failed miserably, and then migrated to a Joes 4x4. Being moreso a US based machine I struggled to get it working properly on my budget due to the differences between the US and Australia. Getting more and more frustrated with it I decided to pull it down and store it while I built my third machine. This time around I went with a Mechmate which is primarily a metric based machine.

    Of course my budget went out the window with this one and I am now about 90% complete, currently in painting and control box building mode. It is a full sheet machine (2400x1200 here in Aus) and I am hoping one day to make a small business around it.

    Off to view some more threads and to also start another.

    Cheers
    Bruce
    Sydney, Australia

  2. #2
    welcome to the site bruce.
    hopefully you will get a log going on progress of your mechmate,they hardly ever get a mention on here.
    I was on the mechmate forum a few years back looking for ideas for my first build but building one of those with next to no experience was a bit too much too soon for me.
    by all accounts and from what ive seen of them there good machines.

  3. #3
    Hey Bruce,

    Welcome to the forum, we have some other members from "down-under" with us here as well so your not alone and should fit right in, I too look forward to seeing the Mechmate come to life, if you do plan on doing a build log.

    .Me
    .Me

  4. #4
    Thanks guys, good to hear there are a few Aussies here too.

    Will definitely be posting re the big MM. I am of course running a log on the Mechmate site but it would be good to have one going here too. When I have nutted out my control box (all time consuming at the moment) I'll fire something up.

    Cheers

  5. The Following User Says Thank You to ozspeedway For This Useful Post:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEW MEMBER: Hi from Sydney
    By Bladehunter in forum New Member Introductions
    Replies: 1
    Last Post: 19-11-2010, 12:20 PM
  2. NEW MEMBER: New member from Sydney
    By timjimh in forum New Member Introductions
    Replies: 1
    Last Post: 07-10-2010, 11:16 PM
  3. NEW MEMBER: G'day from Sydney
    By tumutbound in forum New Member Introductions
    Replies: 5
    Last Post: 09-06-2009, 03:22 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •