Fix engrave vertical gap or Upgrading laser cutter control card Leetro MPC6515 ?

[Paul Shroom]

Hi all,

Can anyone recommend or help please? What is the best option to to fix this or upgrade my laser control card?

150 Watt laser 2440 x 1220 mm bed.
We currently have a MPC6515 control card
Dll: 4.1.2.2
Firmware: 4.1.2.5
Hardware: 4.0.0.1
USB Firmware: 1.0.0.11
SN: 12430071
On start-up the LCD screens Says...
SYSTEM STARTING PLEASE WAIT V4.0.3
Windows 7 32&64bit



My Leetro MPC6515 It doesn’t leave a gap between each part of an engraving so when you engrave there is no space vertically between objects so they come out touching together vertically stacked. And if i change scan gap i get strange engraving results.

I'm based in the south cost of England, Bournemouth. Dose anyone know if there is someone local I can get technical assistance with upgrading chines lasers?




Looking at these, what are people experiences with all these, is there any i have forgotten?

LinkMotion with ‘AGNI’ USB Micro-Laser Controller for CO2 Laser Machines
LinkMotion with ?AGNI? USB Micro-Laser Controller for CO2 Laser Machines

RuiDa laser cutting engraving system RDC6344G ? or
RuiDa laser engraving cutting card RDLC320-A ?
SHENZHENREADER TECHNOLOGY CO.,LTD

AWC608C Color display Laser Engraving
LaserCAD Laser Engraving&Cutting Controller
Sinjoe Laser Color Screen Cutting and Engraving Controller AWC-608C | Shenzhen Sinjoe Laser Technology Co., Limited

Leetro™ MPC6535/MPC65 improves major performance compared to MPC6515
MPC6535--Leetro Automation Co.,Ltd.

RetinaEngrave v4 USB Laser Controller
FSL no longer supports DIY installs?
RetinaEngrave v4 USB Laser Controller

All the best Paul

[gavztheouch]

I don't know how to fix your current Controller but I have built a diy laser that uses a DSP from lightobject. Com


Changing it over is quite easy if you have some experience with cnc or electronics. If not plan for plenty of headaches and a steep learning curve.

A new controller will cost you about £400.

Have you been using this machine for long? Is it a new problem.?

[Isaac]

Aliexpress has the AWC608 for £200 delivered.

[Paul Shroom]

Hi all,

Thanks for the comments. Think it might have always done it, normally engrave pictures but just did some bits with gapes between and it come out like this?

Looking for a service engineer that can help near Bournemouth?

The AWC608C and LinkMotion with ‘AGNI’ are looking like the 2 best options? Is there any advantage over controllability of PWM on a cheep laser tube with LinkMotion with ‘AGNI’?