. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    I will be buying a hobby sized machine, but would it be possible to make this part on such a machine.

    Denford triacs
    Or
    Emco 55 size, if I can't find 1 then would have to be syil 4X plus.





    Now the size from top to bottom are

    10mm dia 8mm across flats

    10mm dia x 30mm long Stepped to 12mm x 18 long Stepped 20.5 x3 long.
    Then the larger dia of 57mm x 23.5

    Turn it round I then have 54mm bore 21 deep, this is a Ti clutch bell for an Rc car.

    I made the 1 above on a manual lathe, I understand a lathe would be best for making this but would this be pos on CNC miller.

    Thanks

    Sent from a GS4 using tapacrap
    Last edited by Dean jeffery; 04-06-2014 at 10:42 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WANTED: Hobby CNC Mill
    By smartbusa in forum Items Wanted
    Replies: 3
    Last Post: 08-10-2013, 09:42 AM
  2. Replies: 2
    Last Post: 02-04-2012, 09:13 PM
  3. NEW MEMBER: Just joined, hobby level
    By cncgcg in forum New Member Introductions
    Replies: 12
    Last Post: 03-12-2011, 02:32 PM
  4. RFQ: Parts for my hobby from your hobby
    By Phobia1 in forum Projects, Jobs & Requests
    Replies: 1
    Last Post: 18-01-2011, 02:57 PM
  5. NEW MEMBER: It's now officially a hobby!
    By Ionman in forum New Member Introductions
    Replies: 1
    Last Post: 30-12-2010, 08:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •