1. #1
    Afternoon all,

    Just signed up as I am now the proud owner of a Triac FANUC ATC. That's the good news. The bad news is I am a bit (read "a lot") clueless on the CNC side of things but I am will to learn!

    Hoping to make large (1/5 scale) RC models once I get to grips with the technology...

    The machine is 3 phase so my first challenge is getting it up and running on a single phase supply. I shall post a thread in the electrickery section on that one.

    Anyhow, better do some paid work I suppose,

    TTFN

    Charlie.

  2. #2
    Afternoon all,

    Just joined up as I have recently become the proud owner of a Denford Triac fanuc ATC.

    I am somewhat clueless on the CNC front but am willing to learn and hope to mine you clever lot for information and guidance :)

    I hope to make 1/5 scale RC models once I get to grips with the technology...

    The machine is 3 phase so my first challenge is getting it to run on a single phase supply. I shall put a post in the electrickery forum for help on that one.

    Anyhow, best do some paid work I suppose...

    Cheers,

    Charlie

Similar Threads

  1. BUILD LOG: Operation Clueless, CNCRP 4848 Build Log Eventually.
    By BedlamRik in forum DIY Router Build Logs
    Replies: 12
    Last Post: 28-12-2012, 12:39 AM
  2. newbie needs help
    By pauley555 in forum Milling Machines, Builds & Conversions
    Replies: 1
    Last Post: 05-07-2012, 09:48 PM
  3. NEW MEMBER: CNC Newbie
    By packman in forum New Member Introductions
    Replies: 6
    Last Post: 11-05-2012, 10:07 AM
  4. NEW MEMBER: newbie
    By stevedemicoli in forum New Member Introductions
    Replies: 5
    Last Post: 31-03-2012, 10:12 AM
  5. NEW MEMBER: Newbie here
    By Mr Tim in forum New Member Introductions
    Replies: 0
    Last Post: 23-08-2011, 08:50 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •