. .
  1. #1
    This part is a joystick crossmember (for the 1980s classic Defender).
    Stainless steel (maybe aluminium if that's all I can get done).
    1/2" square or 1/2" AF hexagon (your choice, I can supply it)
    The spigots are approx 6mm for a sliding fit with a 6x17x7 bearing (I can send you sample)
    The angled hole is to suit a 4mm roll pin (I can send you a sample).

    I might want a variety of main hole diameters eg 5.7mm to 6.4mm (to allow a decent fit of various worn handles)
    alternatively a single hole size and advice on how to open it out.

    I'll want a first off, and then a batch of about 50.

    I might be able to change the roll pin hole to perpendicular if that makes a difference to whether the job gets done.


    Any advice (materials, methods, design, other forums to ask) also appreciated.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	cross_member_new.png 
Views:	297 
Size:	9.9 KB 
ID:	12611  
    Last edited by jimbo_cnc; 23-06-2014 at 08:46 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. RFQ: Very simple small part
    By Shinobiwan in forum Projects, Jobs & Requests
    Replies: 5
    Last Post: 11-01-2013, 01:02 AM
  2. RFQ: Request: 200 units of a small part
    By craynerd in forum Projects, Jobs & Requests
    Replies: 1
    Last Post: 13-02-2012, 10:25 AM
  3. RFQ: RFQ: 3 x M5 holes drilled and tapped/ +/- 0.01mm required
    By neurofen in forum Projects, Jobs & Requests
    Replies: 9
    Last Post: 25-01-2012, 04:26 PM
  4. RFQ: cnc woodern car buck quotes please
    By allkarma in forum Projects, Jobs & Requests
    Replies: 3
    Last Post: 23-05-2011, 03:58 PM
  5. Request for two small steel rod-esque lathed part!
    By HankMcSpank in forum General Discussion
    Replies: 42
    Last Post: 29-06-2009, 02:32 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •