Selling a loads of cnc bits, most of them have been used lightly but in good working order!#
Make me an offer and grab yourself a bargain, it all must go!
3 off Nema 34 4nm 8 Wire steppers from motion control products (never used)
5 off Nema 34 Stepper motors, 4nm from Zapp (3 Unused)
6 off Kinco high voltage drivers from Zapp (2 Unused)
9 off Hiwin HGW 15 Carriages(4 used 5 unused)
Also have 2 off pieces 300mm and 2 off pieces 1500mm of the corresponding HGR15 linear guide
4 off HGW 25 Carriages (all used)
Also have 2 off pieces 3500mm of the corresponding HGR 25 linear guide
3 off Siboni 5:1 Nema 34 planetary gear boxes with 8nm Steppers
4 off Allen Bradley IP Rated E-stop Switches (never used)
6 Pieces of Module 1 15x15mm Gear Rack, Drilled & counterbored on 65mm Centers
i'm interested in the steppers and drivers, can you pm me some prices
Also intetested in the 34 nemas, the carriages and the rails please? Both 25's and 15's. Could you send prices please? Thanks.
am interested as well, ? need price ideas please
Thanks for the interest but afraid someone has taken the lot off me last night,
Again thanks for the interest!
Jazz or JohnS ;)
By gabriel moreira in forum Rails, Guideways & BearingsReplies: 4Last Post: 09-05-2014, 01:49 PM
By grunt-will in forum Items On eBay UKReplies: 0Last Post: 08-04-2014, 01:28 PM
By njhussey in forum Items On eBay UKReplies: 0Last Post: 05-01-2014, 11:12 AM
By range3rrr in forum Rails, Guideways & BearingsReplies: 1Last Post: 24-08-2011, 10:44 PM
By Jonathan in forum Stepper & Servo MotorsReplies: 2Last Post: 24-03-2011, 01:24 PM