Hi everybody
Does anybody know if the hiwin carriages can be putted on the rail any way i want, or there is something i have to be carefull.
I have noticed that the rail has arrows printed that show one side of the rail. Also carriages have one side milled flat and the other not.
I ask this because i had a problem while designing in solidworks
The problem is that the distance from the center of the hole to the side is 5,6mm for the one side and 6mm on the other.
Those dimensions have been measured from the 3d cad file that hiwin let me download from the official hiwin site.
I am talking about the hiwin HGH20CA carriage
Any idea woul help

Thank for your time.

Vagelis