Thread: CNC newbie electronics query II
Threaded View
-
09-07-2014 #1
Hi, I need some final advice on wire choice for my CNC electronics. Ive had great advice on previous post.
Firstly, the power supply Im using is a PS408-12 type (http://www.leadshine.com/productdeta...model=PS408-12)
What would be the recommended fuse to use on the power plug, and is this based on the power supply output which is 36V/8A?
Secondly, for my connection between PSU and driver, i want to buy this wire of ebay due to cost.(http://www.ebay.co.uk/itm/FLAT-TWIN-...item3a8aa1aa53).
Is this OK to buy the 11A wire, considering the current and voltage output from PSU being 36V/8A?
Thirdly, what wire can i use between BOB and driver for signal, Im not considering CAT 5 cable just yet and only want minimal for playing with my CNC electronics at moment. Any recommendation of ebay?
Thanks in advance
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
CNC newbie electronics query
By Skydeals in forum General ElectronicsReplies: 17Last Post: 08-07-2014, 06:06 AM -
Query - Zen Toolworks looky likey
By Plod in forum Marketplace DiscussionReplies: 9Last Post: 30-11-2013, 01:15 PM -
Help, electronics
By totts in forum Motor Drivers & ControllersReplies: 2Last Post: 14-09-2011, 09:09 PM -
A simple query about homing switches & milling practise
By HankMcSpank in forum General DiscussionReplies: 5Last Post: 13-06-2009, 11:56 PM
Bookmarks