Thread: Newbie design need advise
Threaded View
-
15-07-2014 #1
Hi everyone!
Greeting from Singapore!
I'm new to both CNC and this forum.
Earlier was doing research and came up with a simple design(post on http://www.cnczone.com/forums/diy-cn...er-design.html before I got to know this forum)
After read up more and research, now came up with new design and seeking advice.
Current design using all steel tube and will be welded mostly.
65x65x3mm
150x75x3mm
12mm steel flatbar for all the plates that you can see on the drawing(Read a lot, most people suggest 20mm aluminum for Z axis, will 12mm steel flatbar work?)
Hiwin 20mm rail for X axis, 16mm rail for both Y and Z axis
2 x 2010 ballscrews for X axis, 1610 for both Y and Z axis
Overall length 1m x 1m(External) due to space constraint.
Cutting area will be ~ 700x700mm
Hardest material to be cut will be aluminum.
Thanks!
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Interesting Papers on heavy duty design, vibrations, composites and column design
By D.C. in forum Gantry/Router Machines & BuildingReplies: 15Last Post: 25-06-2016, 10:13 PM -
Newbie. Questions about design software and machine control software
By MTech in forum Computer SoftwareReplies: 2Last Post: 11-12-2012, 12:58 PM -
I need advise again
By habibuzziwa in forum General DiscussionReplies: 14Last Post: 08-10-2012, 10:08 AM -
I need advise
By habibuzziwa in forum General DiscussionReplies: 7Last Post: 03-10-2012, 10:50 AM -
Design help etc required with DIY CNC Router Design / Build
By MikeyC38 in forum Gantry/Router Machines & BuildingReplies: 12Last Post: 21-10-2011, 04:50 PM
Bookmarks