. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #10
    Well....
    Ive changed my mind again! not sure whether to start another thread now.
    I have decided that I am going to buy a mini milling machine for machining steels and simple plates ect which will help me build my router which will therefor be used mainly for woods and plastics with maybe the occasional bit of aluminium if I decide to convert the mill, I am thinking something like the ama25lv, its about the right size to get behind my shed!
    This means I am back to idea 6 albeit with a conventional Z but I have measured the area where I am building my 'workshop' and once I have fitted soundproof / insulation I will be left with a working area of about 1.6m wide by 4m long. If i install my router flat then that will leave only 60cm at best to get past the machine, Is this too tight? it could be quite dangerous with the gantry swinging back and forth!
    My other option would be to install it against the wall length ways or height ways and bolt to the floor, height ways would work best for me but that depends on the recomended gradient and the lump of concrete its bolted to!
    Can you take a look at my Y carriage arrangement and let me know if it will be OK, I moved the lower carriages together by 50mm and the upper ones 50mm further apart so it utilises the space on top of the beam and gives me some of the movement back which was lost by using the conventional Z.
    Things to do:
    1. Build my shed/workshop
    2. Buy a milling machine
    3. Build my router!
    4. convert the milling machine?

    Cheers, Charlie
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	idea 6.jpg 
Views:	252 
Size:	121.3 KB 
ID:	13259  

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Design of small router (700x900) for aluminium
    By Edward in forum Gantry/Router Machines & Building
    Replies: 7
    Last Post: 16-12-2017, 07:34 PM
  2. BUILD LOG: New Build, Aluminium Frame Router/Mill
    By Davek0974 in forum DIY Router Build Logs
    Replies: 101
    Last Post: 31-08-2016, 05:28 PM
  3. BUILD LOG: Steel Frame, Aluminium Hybrid Design Thread
    By f1sy in forum DIY Router Build Logs
    Replies: 0
    Last Post: 23-02-2016, 10:04 AM
  4. CNC Frame Design Help
    By zhenning in forum Gantry/Router Machines & Building
    Replies: 9
    Last Post: 26-12-2015, 05:44 PM
  5. BUILD LOG: Steel frame cnc router design/build
    By CraftyGeek in forum DIY Router Build Logs
    Replies: 110
    Last Post: 06-05-2015, 10:00 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •