Page 2 of 2 FirstFirst 12
  1. #11
    Quote Originally Posted by JAZZCNC View Post
    No there isn't one sorry.!

    That's a shame. Do you have an album containing all the photo's which you'd like to share? I am particularly interested in how you have attached the BK/BF blocks to the extrusion as I thought the hole spacing was 6mm out?

    Dave

  2. #12
    Quote Originally Posted by biketrialsdave View Post
    That's a shame. Do you have an album containing all the photo's which you'd like to share? I am particularly interested in how you have attached the BK/BF blocks to the extrusion as I thought the hole spacing was 6mm out?

    Dave
    haha, I started designing my router the other week and noticed this as well... I went through a ton of build logs and everyone seems to do it but not exactly sure how. Do people typically just drill/tap the extrusion? I was considering moving to the WBK bearing style and mounting in the side plates when I noticed this.

    - JZ

  3. #13
    Quote Originally Posted by JZimmy View Post
    haha, I started designing my router the other week and noticed this as well... I went through a ton of build logs and everyone seems to do it but not exactly sure how. Do people typically just drill/tap the extrusion? I was considering moving to the WBK bearing style and mounting in the side plates when I noticed this.

    - JZ
    The way to do this is to buy 45mm extrusion. Then you are 1mm out of perfect alignment but it will fit :)

    Skickat från min SM-N910C via Tapatalk

  4. #14
    Quote Originally Posted by Nr1madman View Post
    The way to do this is to buy 45mm extrusion. Then you are 1mm out of perfect alignment but it will fit :)

    Skickat från min SM-N910C via Tapatalk
    Well that makes a lot more sense, thanks! I still might go with the WBK bearings as I might be able to fit the ballscrew under 20mm rails without having to space them... not sure if its possible yet, it will be very tight.

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Vertical router design
    By EddyCurrent in forum Gantry/Router Machines & Building
    Replies: 12
    Last Post: 29-03-2014, 10:43 PM
  2. My second router design
    By Joe in forum Gantry/Router Machines & Building
    Replies: 14
    Last Post: 03-05-2013, 06:07 PM
  3. Design help etc required with DIY CNC Router Design / Build
    By MikeyC38 in forum Gantry/Router Machines & Building
    Replies: 12
    Last Post: 21-10-2011, 04:50 PM
  4. Need 6' x 4' bed, 4 axis router design.. Help..!
    By fasteddy in forum Gantry/Router Machines & Building
    Replies: 29
    Last Post: 17-09-2010, 12:56 PM
  5. Base design for new router
    By cncgreg in forum Gantry/Router Machines & Building
    Replies: 2
    Last Post: 31-08-2010, 03:35 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •