. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    Quote Originally Posted by martin54 View Post
    will try switching the axis around to see what happens, could probably use my bob to test the machine if I had to, I know that works fine lol
    Would only do that as a last resort if it's not a spare BOB. Could be something else killing the BOB, if indeed it is the BOB, doubt somethings killing it it but could be.!
    Something I would try that wont hurt is your parallel port cable.! . . . In past I've had cables give silly troubles but often they just don't work or are irratic never worked then stopped so it's a clutching straws move. But still easy try so worth doing for elimination purposes.

    Another thing worth trying that won't hurt and is a big elimination is trying your PC. This takes the PP and software out the equation which are both candidates for trouble.!
    Last edited by JAZZCNC; 24-08-2014 at 08:26 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Eagle CAD problem
    By Fivetide in forum CAD & CAM Software
    Replies: 11
    Last Post: 06-05-2013, 11:56 PM
  2. Another screw problem
    By Swarfing in forum Marketplace Discussion
    Replies: 5
    Last Post: 27-03-2013, 09:24 PM
  3. Problem with X
    By gorbo in forum General Discussion
    Replies: 17
    Last Post: 24-02-2011, 05:33 AM
  4. NEW MEMBER: New with a threading problem
    By GeoffS in forum New Member Introductions
    Replies: 4
    Last Post: 02-12-2009, 09:23 PM
  5. Z Problem
    By airwolf in forum Machine Discussion
    Replies: 2
    Last Post: 10-11-2009, 08:08 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •