. .
Page 1 of 3 123 LastLast
  1. #1
    Hey guys,

    I normally have a good friend of mine building my control boxes so ive never had the chance to see how its done. my question is to you good guys how the hell do i wire these things up, or more importantly can you explain the diagram for me?

    Could someone please explain the attached image please so i can try crack this once and for all ..

    Driver : PM452
    Motor : Plantry gearbox with CNC4you - 60BYGH301B

    Please guys before you sit back in your chair and snigger about my question please consider we were all here at one point - maybe some of us more clued up than others

    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Screenshot_2.png 
Views:	1033 
Size:	36.1 KB 
ID:	13646  

  2. #2
    Hey d-man, those curly bits are the windings of the stepper motor. So from your pic you would join the YEL and BLU together and the ORG and BRN. Then run the remaining 4 to your stepper driver.
    I'm sure someone who has a clue what they are talking about will be along shortly with better info so best you wait for them!
    Jim
    Last edited by cncJim; 17-10-2014 at 09:14 AM.

  3. The Following User Says Thank You to cncJim For This Useful Post:


  4. #3
    Ah that does make sense! cheers pal!

    however my current setup runs 4 pins and this one will work out as 6, or are you saying that the joined wires dont go to anything which would result in 4 pins :)

  5. #4
    Are you sure you want to use that way to connect the motor ? that's a series connection, most would recommend the parallel connection.

    A+ Red
    A- Black
    B+ White
    B- Green

    Yellow & Blue, connected together but going nowhere, just insulate once joined.
    Orange & Brown, connected together but going nowhere, just insulate once joined.
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

  6. #5
    Well it was just to try get my head around it Eddie, then i looked at the parallel connection and started to smell smoke (From my brain!) Parallel connection here http://prntscr.com/4wyek3

    Cheers for that Eddie appreciate it

  7. #6
    Ok so, going for the parallel connection am i right in saying...

    A+ - Red/Blue
    A- - Yellow/Black

    B+ - White/Brown
    B- - Orange/Brown



    My head hurts this early

  8. #7
    Parallel connections

    A+ Red & Blue joined together
    A- Yellow & Black joined together
    B+ White & Brown joined together
    B- Orange & Green joined together

    Edit: Ha ha you just beat me to it but you got B- wrong (typing too fast likely)
    Last edited by EddyCurrent; 17-10-2014 at 10:11 AM.
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

  9. The Following User Says Thank You to EddyCurrent For This Useful Post:


  10. #8
    Thats it im now a "pro" haha cheers boys appreciate it! time to wire this baby up

  11. #9
    Crap ran into another stickler...

    Im using the MSD542 drivers with the Nema 23 SY60

    Motor diagram looks like this...


    However the Driver datasheed does not give colour codes http://www.motioncontrolproducts.com...ing-driver.pdf

    I have the wires joined, its just getting the 4 coupled wires into the A+ A- & B+ B- if you know what i mean.. how do you determine what double wire is for where
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	SY60.bmp 
Views:	876 
Size:	1.97 MB 
ID:	13648  

  12. #10
    A+ yellow/white & red
    A- yellow & red/white
    B+ green/white & black
    B- green & black/white

    see diagram on page 7 for parallel 8 wire connection

    http://www.leadshine.com/UploadFile/Down/AM882m.pdf
    Last edited by EddyCurrent; 17-10-2014 at 03:47 PM.
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Stepper motor tunning wiring
    By handyoodman03 in forum Stepper & Servo Motors
    Replies: 47
    Last Post: 11-01-2013, 05:49 PM
  2. Newbie Initial Wiring/Setup
    By Rikk in forum Motor Drivers & Controllers
    Replies: 3
    Last Post: 28-06-2011, 10:19 AM
  3. Stepper motor wiring
    By Buba b in forum Stepper & Servo Motors
    Replies: 5
    Last Post: 28-03-2010, 06:16 PM
  4. Stepper Motor Wiring (Screened?)
    By pequod in forum Stepper & Servo Motors
    Replies: 19
    Last Post: 03-08-2009, 10:15 AM
  5. Motor / drive wiring problem: help!
    By lateAtNight in forum General Electronics
    Replies: 2
    Last Post: 29-04-2009, 07:40 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •