1. #1
    Hello u have a new cnc 600x900 router and I no how to turn it on all that stuff I don't no how to use vcave I'm wanting to cut upto 20" letters any font can anyone help of maybe do me a few to get me started thanks

  2. #2
    It looks like there is a dialogue box in vcarve where you enter "Text height"; http://www.instructables.com/id/Crea...th-VCarve-PRO/
    The best way with new stuff is to read the manual first.
    Last edited by EddyCurrent; 23-09-2014 at 09:17 AM.
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

  3. #3
    Where abouts in West yorkshire are you.? If not to far then I'll see about helping you.!

  4. #4
    Hi I have managed and learned i need help and I don't no what I'm doing wrong I am useing vetric to cut out letters and numbers I put it in to computer to do 6" high when it cuts its only doing about 5" some times smaller has anyone got any tips or help I'm useing 18mm mdf and doing 6 or 7 passes as recommended by cnc people thanks my number is 07900614166 I'm from halifax

  5. #5
    Have you calibrated the machine so that 6" in the software = 6" movement of the machine ?
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

  6. #6
    Not a good idea to post your number so i'd remove it.

    I'll PM you my number and see about helping.

Similar Threads

  1. eBay: CNC Router - EXELCNC HD1013 - Heavy Duty CNC Router
    By Deuce_Coupe in forum Items On eBay UK
    Replies: 0
    Last Post: 16-07-2014, 11:46 AM
  2. Best all round mill/router? Vertical mill or gantry router?
    By Richard in forum Machine Discussion
    Replies: 2
    Last Post: 18-02-2014, 04:18 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •