Thread: Wiring a motor - as a newbie!
cheers does it matter if its not a Leadshine?
No, it was just a diagram I knew about, it's the motor drawing that matters.Spelling mistakes are not intentional, I only seem to see them some time after I've posted
OK guys another one im needing help with... i have another SY60STH86/3008BF - however the wire colours are different but on zapps website datasheet
The wires on my motor are as follows
sure this is just done to confuse the hell out of me haha
OK so maybe not so bad as i thought.. only the Blue & Blue/White is different. will call this the "Yellow" wire :)
So is this correct:
A+ yellow/white & yellow (but its blue!)
A- Red/White & Red
B+ Green/White & Green
B- Black/White & Black
Last edited by D-man; 23-10-2014 at 09:54 AM.
Last edited by EddyCurrent; 23-10-2014 at 10:12 AM.Spelling mistakes are not intentional, I only seem to see them some time after I've posted
Nice one buddy thanks
Im really struggling to get this around my head, i think i have read it so many times i have confused myself (i need to swap from series to parallel as i didn't realise first time round)
which pairs do i join to each other and which pairs to i wire to the terminals?
Using the diagram above
A+ (Yellow/White to Red)
A- (Yellow to Red/White)
B+ (Green/White to Black)
B- (Green to Black/White)
(Yellow to Red) not connected to any terminal, just connect together and insulate.
(Green to Black)not connected to any terminal, just connect together and insulate.
Last edited by EddyCurrent; 24-10-2014 at 11:45 AM.Spelling mistakes are not intentional, I only seem to see them some time after I've posted
Ok so when in parallel you pair the 8 wires (4pairs)accordingly and then they would go strait to the terminals on the driver were as in series you just have 4 of them paired (2pairs) and the other 4 go to the driver?
Yes that's right
Last edited by EddyCurrent; 24-10-2014 at 01:08 PM.Spelling mistakes are not intentional, I only seem to see them some time after I've posted
By handyoodman03 in forum Stepper & Servo MotorsReplies: 47Last Post: 11-01-2013, 04:49 PM
By Rikk in forum Motor Drivers & ControllersReplies: 3Last Post: 28-06-2011, 09:19 AM
By Buba b in forum Stepper & Servo MotorsReplies: 5Last Post: 28-03-2010, 05:16 PM
By pequod in forum Stepper & Servo MotorsReplies: 20Last Post: 03-08-2009, 09:15 AM
By lateAtNight in forum General ElectronicsReplies: 2Last Post: 29-04-2009, 06:40 PM