. .
  1. #1
    Hi all looking for a post for powermill to mach3.any advice or help much appreciated

  2. #2
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

  3. #3
    thank you for the link great help,just hope one of them works,will update if it works ok.

    Quote Originally Posted by EddyCurrent View Post

  4. #4
    Think you have to be a member for a certain period so can't seem to get it.any other post that work much appreciated

  5. #5
    Hi all tried the fanuc 1c post and don't seem to work on most strategies unfortunately.anyone got any that work or advice would be much appreciated

  6. what version of powermill are you using? there is a number of post that works well with mach3 among the standard post that comes with powermill

  7. #7
    Hi thank you for the rely I was using 2012/2014 version at work but never found a post so Brough bobcad for the hobby machine would be good to have a good PM post for people using it

  8. on powermill 2014 and 2015 i use the MAHO post that comes with powermill and it works good for me

  9. #9
    i have a denford whaich i had converted to Mach 3, an excellent conversion using top quality kit.
    wasnt cheap though.

    Paul

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Another 60/40 post
    By amxen in forum Machine Discussion
    Replies: 6
    Last Post: 27-08-2014, 10:17 PM
  2. NEW MEMBER: First Post
    By Jumbo in forum New Member Introductions
    Replies: 3
    Last Post: 17-10-2011, 01:58 PM
  3. NEW MEMBER: Hello All, My First Post
    By Harvey Wallbanger in forum New Member Introductions
    Replies: 1
    Last Post: 11-06-2011, 10:05 PM
  4. NEW MEMBER: first post
    By makinswarf in forum New Member Introductions
    Replies: 3
    Last Post: 08-05-2009, 02:44 AM
  5. Post Processors BobCAD-CAM & Mach3
    By m.marino in forum BobCAD-CAM
    Replies: 0
    Last Post: 21-01-2009, 12:37 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •