Thread: Various CNC items for sale
Got a whole bunch of stuff from my old router project that I dismantled some time ago and now want to sell on the parts otherwise they will just hang around forever!
PS407 42v power supplies x 2
MSD542 Stepper drivers x 4
Hiwin profile rail 15mm with HGH15CAC x 2 carriages on each rail. 500mm in length. Two lengths. (EDIT: SOLD)
20mm profile rail, brand unknown (maybe Thompson? EDIT: Actually "ABBA" rail whoever that is... bought from Merchant Dise / worldofcnc.com if I remember correctly) 2 carriages on each, 520mm length. Two of each.
Ballscrews 600mm total length 520mm thread length, 16mm diameter, single nut
Fixed and floating ends. (EDIT: ONE REMAINING)
Kress 800 FME router with 1/8”, 2, 3, 6, 8 mm collets each with their own nut.
Coolermaster ATCS aluminium case. Can take a Extended ATX motherboard all the way down to Mini ITX which is what I had in there with the stepper drivers and all the other components. 5 cd drive bays, 2 hard drive and 1 floppy drive bay. PSU not included. Motherboard tray slides out but please note that I have drilled some extra holes into this to accommodate the stepper drivers etc.
DIYCNC Optoport parallel breakout board. Version 1.3 according to the manual (included of course). Has 2 relays onboard. Hardly ever used as I upgraded to galil system not long after I bought it.
Custom built Z Axis, double nut ballscrew of brand unknown. Rail and carriages are NSK. Stepper mount included.
I doubt anyone will be interested but I have various lengths of 40 x 40 aluminium extrusion with 8mm slots.
If anyone is interested in these items please let me know. Open to reasonable offers ( say around half of the current RRP?) Plus cost of actual postage on top. Further pictures on request.
Last edited by lateAtNight; 19-11-2014 at 10:13 PM.
Can you pm me a price for the two 500 x 15mm rail with blocks pal - if they are still available that is
Can you pm me a price for the 4 x stepper drivers please.
Would like a price for the kress router & collets please
Also for sale:
Vertex flood coolant tank. A bargain at £10 + postage. Has a european plug.
Standard clamping kit that you find everywhere these days (think its 58 pc) with M8 thread, 10mm slots. £10 + postage.
pm'd regarding coolant tank set up,
Last edited by deisel; 20-11-2014 at 02:08 PM.
will buy tank, please advise p&p etc, Regards Tony
I never would have thought the tank would get the most interest of all these bits! I just wanted the space it was hogging :)
Anyway, since there has been a bit of interest with people saying the will pay a bit more, I am going to bump up the price. Best offer so far has been £25 + £10 postage. If anyone would like to better than please let me know by tonight otherwise its going to the current highest offer-er.
Also njhussey: yup, it is working. Brought it inside from my shed and cleaned up a little and tested it out just to make sure.
Last edited by lateAtNight; 20-11-2014 at 04:16 PM.
Good evening,got to be worth £40 +£10 p&p to me, so thats my offer, best regards Tony
By millmateuk in forum Items For SaleReplies: 1Last Post: 26-11-2012, 03:55 PM
By petesos in forum Woodworking Project ShowcaseReplies: 7Last Post: 19-11-2012, 10:16 PM
By DLODGE in forum Items For SaleReplies: 4Last Post: 07-08-2012, 05:53 AM
eBay: Items I posted on E-bayBy m.marino in forum Items On eBay UKReplies: 1Last Post: 29-07-2012, 07:01 PM