Thread: milling table

  1. #1
    does anyone know where I could get a milling table 700mm x 210mm no less.
    amadeal have one that size but sell it with the base and arc euro do them that length but are too narrow,
    id consider used if anyone has one.thanks

  2. #2
    Quote Originally Posted by deisel View Post
    does anyone know where I could get a milling table 700mm x 210mm no less.
    amadeal have one that size but sell it with the base and arc euro do them that length but are too narrow,
    id consider used if anyone has one.thanks
    Let us know if you find a source - I'm on the lookout too for one about that same size. Was thinking of asking the various suppliers if they could do one as a 'spare part' - e.g this machine from Chester has a table about the right size. But not sure how willing they'll be to go to the trouble of sourcing one if not actually for a machine bought from themselves. Though presumably all they'd have to do is add it to their list for the next shipment...

  3. #3
    what mill have you got pete? im modding an sx3 bought from arc and wondering wether they would oblige.
    i remembered sieg do an sx4 mill ,table size is 820mm x 240mm though.

  4. #4
    Quote Originally Posted by deisel View Post
    what mill have you got pete? im modding an sx3 bought from arc and wondering wether they would oblige.
    i remembered sieg do an sx4 mill ,table size is 820mm x 240mm though.
    Making my own from scratch :-). Will update the build log soonish I hope...

  5. #5
    I'd set up a favourite search on eBay - something like this.
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.

  6. #6
    will do,i did message sieg but they forward you to resellers and wont deal direct,one will turn up ;)

  7. #7
    Quote Originally Posted by deisel View Post
    does anyone know where I could get a milling table 700mm x 210mm no less.
    amadeal have one that size but sell it with the base and arc euro do them that length but are too narrow,
    id consider used if anyone has one.thanks
    I don't know it it will of any use to you, but I have a used compound table from a Sealey Mill. You seem to be further down the build route than I am and I don't think I will really have time. It is currently sitting on a small pallet to move it around. Unless you live in the north east it would have to be picked up by a carrier. Contact me if of interest.

Similar Threads

  1. Replies: 0
    Last Post: 12-11-2014, 09:14 AM
  2. I want a vacuum table!
    By Tenson in forum Machine Discussion
    Replies: 44
    Last Post: 08-01-2014, 07:40 PM
  3. MY 4`x 4` table
    By Steve-m in forum DIY Plasma Build Logs
    Replies: 65
    Last Post: 30-10-2012, 12:07 AM
  4. DIY Vacuum Table
    By templecorran in forum Machine Discussion
    Replies: 18
    Last Post: 10-11-2010, 12:11 AM
  5. RFQ: RFQ: Plasma Table
    By D-man in forum Projects, Jobs & Requests
    Replies: 3
    Last Post: 04-07-2010, 11:08 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •