. .
Page 1 of 2 12 LastLast
  1. #1
    has anyone any idea, on average how many ball bearings should be in a 1605 ball nut from linearmotion (china) I`ve striped mine down and counted 50 but there seems to be room for more. thanks in advance. oh and no I hanvnt dropped them on the floor and lost some....yet!!
    Last edited by bmbaz; 08-12-2014 at 08:55 PM.

  2. #2
    This describes a 1610 nut plus a good video for repacking;
    http://www.mycncuk.com/threads/6565-...6350#post56350
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

  3. #3
    yep cheers eddy, watched this and a similar one. I`ve no problem re packing it, its just at the last circuit there`s a big gap left, this nut hasn't been used yet and I needed to turn it around so I decided to strip it and on counting the balls thought 50 is a strange number so that's why I `m asking

  4. #4
    well mine ended up with 51 total, 17 in each circuit.
    Last edited by EddyCurrent; 08-12-2014 at 10:20 PM.
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

  5. #5
    I thinking that should be right and mine has one missing, it felt ok and still feels ok now I`ve turned it, it was just an observation as I noticed the wipers looked like they`ve been in and out before, I think I`ll have a root about at work tomorrow and see if I can find any.

  6. #6
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

  7. #7
    Just rang our local bearing supplier who's very kindly going to drop me off half a dozen later today,thanks for the info aswell

  8. #8
    Quote Originally Posted by bmbaz View Post
    I thinking that should be right and mine has one missing, it felt ok and still feels ok now I`ve turned it, it was just an observation as I noticed the wipers looked like they`ve been in and out before, I think I`ll have a root about at work tomorrow and see if I can find any.
    Maybe the the operator was sleepy then in China or they spare a ball /nut
    Apart from this is the quality good at Linearmotion?

  9. #9
    Quote Originally Posted by vargai View Post
    Apart from this is the quality good at Linearmotion?
    linearmotionbearings2008 (Chai) is one of the most used Chinese suppliers for this forum I think. Quality seems consistent with the price but I have not used any other similar products for comparison.

    Other used ebay sellers I've seen mentioned are; solar.jean , supermario-au
    Strangely you sometimes have to log into ebay.com to see the listings.
    Last edited by EddyCurrent; 09-12-2014 at 02:17 PM.
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

  10. #10
    Quote Originally Posted by EddyCurrent View Post
    linearmotionbearings2008 (Chai) is one of the most used Chinese suppliers for this forum I think. Quality seems consistent with the price but I have not used any other similar products for comparison.

    Other used ebay sellers I've seen mentioned are; solar.jean , supermario-au
    Strangely you sometimes have to log into ebay.com to see the listings.
    Thanks.
    Is Chai a contact person or place?

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Ball nut brackets, how big do they have to be ?
    By EddyCurrent in forum Lead Screws, Nuts & Supports
    Replies: 6
    Last Post: 10-03-2014, 03:50 PM
  2. taper roller bearings vs deep groove ball bearings
    By dsc in forum Linear & Rotary Motion
    Replies: 8
    Last Post: 10-03-2014, 08:06 AM
  3. Ball screw
    By luke11cnc in forum Lead Screws, Nuts & Supports
    Replies: 5
    Last Post: 20-10-2011, 01:28 PM
  4. Re-filling a ball nut
    By Robin Hewitt in forum General Discussion
    Replies: 2
    Last Post: 10-08-2011, 11:32 AM
  5. ISEL Ball nut
    By cncezee in forum Lead Screws, Nuts & Supports
    Replies: 9
    Last Post: 02-10-2010, 12:11 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •