. .
  1. #1
    Any one got new/old stock Tibken (or equivalent) bearing number on inner part 14125 and on outer 14276-B. Its got flange on Outer part.

  2. #2
    This likely not what you're after otherwise you would have found it ?
    http://simplybearings.co.uk/shop/Tap...duct_info.html
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

  3. #3
    Quote Originally Posted by EddyCurrent View Post
    This likely not what you're after otherwise you would have found it ?
    http://simplybearings.co.uk/shop/Tap...duct_info.html
    yep contacted them today thay are supposed to be comming back if they can get them. The one in the link does not have shoulder on outer the 14276-B means its got a shoulder

  4. #4
    I stock this in my store in an un-marked Chinese brand http://cjfbearings.com/products/14125a-14276-1-25x2-717x0-7813inch-imperial-single-row-taper-roller-bearing

    I can also offer it in UBC at £18.50+ VAT.

    Thanks
    Colin
    [email protected]
    01204 370453

  5. #5
    Quote Originally Posted by fawdry89 View Post
    I stock this in my store in an un-marked Chinese brand http://cjfbearings.com/products/14125a-14276-1-25x2-717x0-7813inch-imperial-single-row-taper-roller-bearing

    I can also offer it in UBC at £18.50+ VAT.

    Thanks
    Colin
    [email protected]
    01204 370453
    Hi Colin the link is not working but from the info in the link it appears that its the 14276 outer without shoulder the part I needis the 14276-B the "B"means the outer race has a shoulder. is this an error in the link?
    Regards

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. taper bearing.
    By i lunn in forum Lathes, Lathe Rebuilding & Conversions
    Replies: 7
    Last Post: 11-12-2014, 10:50 PM
  2. Morse taper drills
    By John S in forum Marketplace Discussion
    Replies: 7
    Last Post: 08-05-2013, 07:00 PM
  3. Why do I get a taper when turning?
    By irving2008 in forum Lathes, Lathe Rebuilding & Conversions
    Replies: 15
    Last Post: 16-12-2012, 10:48 PM
  4. larger home made milling spindles - NMTB/ R8 taper?
    By jonnydeen in forum Tool & Tooling Technology
    Replies: 6
    Last Post: 13-09-2012, 11:17 AM
  5. FOR SALE: Clarkson Autolock Collet chuck set, Boxed INT 30 / NMTB30 taper
    By swarf-boy in forum Items For Sale
    Replies: 0
    Last Post: 04-01-2011, 05:28 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •