. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    Hi Guys
    Making somewhat slow progress on this but the attached pics show the gantry trial assembled. Runs really nicely on the supported round rails and I detect no binding anywhere! However I have invested in a pack of steel shim material because I expect that stuff will need it to get everything square and nice! The biggest step now is to get the plate holding the z-axis stepper manufactured. Hoping that the local FE college will help here as I don't have a milling machine

    Also does anybody have or make some clamps for the 80mm water cooled spindle? I thought Jonathan was making these at some stage but can't raise him via the forum?

    Any tips on what lubricant to use on the supported round rails? I will be using Mobilux EP2 for the ball screws (via the ball nut)

    Regards
    Mike
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMAG0287.jpg 
Views:	2271 
Size:	305.0 KB 
ID:	15698   Click image for larger version. 

Name:	IMAG0285.jpg 
Views:	2196 
Size:	314.4 KB 
ID:	15699  

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. BUILD LOG: 8x4 router build. Steel base & Aluminium gantry gantry
    By D-man in forum DIY Router Build Logs
    Replies: 57
    Last Post: 13-12-2019, 10:43 AM
  2. Setup for squaring twin X-axis gantry
    By routercnc in forum Gantry/Router Machines & Building
    Replies: 20
    Last Post: 26-03-2014, 11:13 PM
  3. BUILD LOG: New build - fixed gantry mill using extruded profile
    By toolchimp in forum DIY Router Build Logs
    Replies: 3
    Last Post: 09-11-2012, 04:10 PM
  4. NEW MEMBER: New Member build finally started in Oxfordshire
    By pjchick in forum New Member Introductions
    Replies: 1
    Last Post: 26-11-2010, 04:02 PM
  5. BUILD LOG: Flying Gantry Build Diary
    By geoff.sim in forum DIY Router Build Logs
    Replies: 8
    Last Post: 29-05-2008, 02:53 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •