Thread: HI

  1. #1
    Just a quick intro before I start with the questions

    I come from a wood/construction background, but have done mechanical/metal stuff since I was a teenager... a long while ago.

    Reasonably competent with lathes, milling and welding, some fabrication & electrical knowledge, but nothing that is going to help me here I suspect.

    Planning a small cnc router, about 750x900 work area for wood (95% I guess) and some non ferrous work.... probably take me a year from now to get it finished I guess.

    I have read a large number of the posts here already.. as well as a couple of other sites so thought is was time to say hello and get started

  2. #2
    Sounds like you will have no trouble with the build. As usual, get some CAD drawings uploaded for comment.
    Last edited by EddyCurrent; 14-12-2014 at 07:32 PM.
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

  3. The Following User Says Thank You to EddyCurrent For This Useful Post:


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts