. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Hi Folks

    Well, after dipping into the site for a couple of months, I finally decided I should register.

    I am currently in the process of building a cnc machine and have assembled most of the bits.

    Just a small affair to start with for the "Mark 1", mainly built of ply with a table size of around 300mm square. If I can make a go of it, will probably have a go at building a larger aluminium model next.

    I started off with a desire to renew my old woodworking hobby after my son reignited my enthusiasm when he started woodworking classes, and this combined with some rather excellent looking wooden clocks (which my eyes are no longer good enough and my hands no longer steady enough to cut by hand) led me down the cnc route.

    Maybe a bit ambitious - dunno

    Cheers

    Pete

  2. #2
    Hi Pete

    Welcome to the forum, don't forget photo's photo's photo's

    Andy

  3. #3
    Rockon ! Clocks would be good to see, PICS PCIS PICS !
    .Me

  4. #4
    Thanks for the advice, not got an e-stop on my build as yet, next on my list

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •