. .
Page 2 of 2 FirstFirst 12
  1. #11
    Hi Jester, I would like to buy cut files for shopbot from you for these bowls. Please contact me at [email protected]. Thanks

  2. #12
    Quote Originally Posted by Jester View Post
    Is it something like this you are wanting ?



    Only took a minute to design and tool path up im not sure about vcarve pro as im using aspire 4 but i can send you the gcode or maybe stl if i can figure that bit out
    I would like to buy the gcode for doing this design. Thanks!

  3. #13
    Quote Originally Posted by mgillham View Post
    I would like to buy the gcode for doing this design. Thanks!
    You can't just run any old code on any machine, you'd have to say what cutter you want to use, what rpm your machine can run and what controller your machine has.
    Speed and cutter must be specified in CAM to generate the moves, the right Post Processor for your machine controller must be selected to generate the correct "flavour" of G-Code for your machine.
    You think that's too expensive? You're not a Model Engineer are you? :D

  4. #14
    Quote Originally Posted by mgillham View Post
    I would like to buy the gcode for doing this design. Thanks!
    I think you need to do a cad course (Online youtube is cheapest) ASAP there is nothing to this design not dissing Jester I'm sure he'd tell you this is a 2 minute mock up.

    How I would do it draw rectangle, extrude, chamfer corners, create sphere, adjust height of sphere until appropriate then subtract from solid (Extruded rectangle), wrap with texture is optional, job done! If you did a cad course you'd learn to make this after the bacon sandwich but before the morning coffee.

    Youtube has some good starter vids of Fusion I intend to use them because I draw in turbocad at moment.
    Last edited by Desertboy; 19-08-2017 at 07:15 PM.
    http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm

    If you didn't buy it from China the company you bought it from did ;)

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. symmetrical hart shape in vectric v carve pro
    By cockneyrebel in forum Vectric
    Replies: 15
    Last Post: 24-02-2014, 02:55 PM
  2. Detailed plans needed for wood CNC machine
    By woodspiral in forum Open Source Designs & Plans
    Replies: 16
    Last Post: 08-02-2014, 11:44 PM
  3. Replies: 0
    Last Post: 19-08-2013, 12:46 AM
  4. Mach3 & V-Carve Problem
    By Ricardoco in forum Computer Software
    Replies: 2
    Last Post: 31-05-2013, 12:53 PM
  5. BUILD LOG: Wood router machine, 600x400
    By troyboy1 in forum DIY Router Build Logs
    Replies: 2
    Last Post: 05-12-2012, 12:47 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •