Looking for tubing that I can hook up to the spindle so as to be able to set things to going and not have to baby sit it other than check once in a while that all is going well. Currently running test bed cuts and proving the G-code from BOBCAD/CAM on V21. Getting things cutting and need to be able to extract the sawdust and wood shavings that are generated to ensure that it does not cause a problem.
As baby sitting the mill with the vacuum hose defeats the purpose of running it in the first place. I have a Power shop vac that moves 54l per minute vacuum and a 35mm adapter hose that came standard for hooking on to a standard swarf extractor tube of a machine (it also has the 100mm unit tubing).
Looking for a nozzle that can be directed towards the cutting mill a well. Any suggestions would be great.
hi buddy, give these guys a call if your after any type of extraction tubing http://www.rubberfast.co.uk/ they have got tones of different tubing types for all your needs. luckily they are only a few miles away from me but im sure they can sort you out!
I use a tumble drier condensor hose from Homebase to clean up my lathe.
It also works for most power tools - one end fits inside my Dyson hose, and the other on the outside of the power tool outlet.
By gorbo in forum Dust Extraction & CollectionReplies: 7Last Post: 17-04-2014, 04:36 PM
By irving2008 in forum Marketplace DiscussionReplies: 20Last Post: 12-09-2013, 05:19 AM
By m.marino in forum General DiscussionReplies: 14Last Post: 01-07-2012, 11:39 AM
By flightcase01 in forum Gantry/Router Machines & BuildingReplies: 8Last Post: 27-08-2011, 10:00 AM
By Jonathan in forum Machine DiscussionReplies: 8Last Post: 03-01-2011, 06:54 PM