Thread: Fine detail Wood.
Thanks again for your detailed advice. On a quick look I do have a couple of fishtails, ashamed to say I never noticed that detail until you mentioned it. The links are particularly useful and will be no doubt adding my cutter box.
Appreciate your taking the time to help.
ha ha, i send you the link from ebay.es , forgot about that.
The savings are considerable. For example what bit he sales for 6$ is 20€ here in Europe , from the German Kyocera branch.
I am doing fine carving with mini saw cutter angled at 45 deg and 6 mm in dia. It last much longer. Cleaning with virgin V cutters.
V cutters are cheap and can be resharpened with polishing on glass table.
Maple is not the best but it is much better than beech. 3d deep, maple can be squared.
Last edited by fifa; 18-02-2017 at 03:37 PM.
By cubikoman in forum Tool & Tooling TechnologyReplies: 6Last Post: 19-02-2017, 09:04 AM
By Boyan Silyavski in forum Metalwork DiscussionReplies: 5Last Post: 09-12-2014, 03:05 PM
By Lee Roberts in forum Wood Finishing Tips & TricksReplies: 3Last Post: 06-04-2012, 10:49 PM
By Normsthename in forum General DiscussionReplies: 1Last Post: 13-08-2010, 10:13 PM
By irving2008 in forum Machine DiscussionReplies: 5Last Post: 09-09-2009, 12:11 AM