Thread: Z axis hesitating
-
02-02-2015 #11
Depends on the type fitted to your machine, generally I believe they're socket head cap bolts so yes.
-
02-02-2015 #12
Sounds to me that your have the motor tuning wrong and motors are stalling.
Go to Motor tuning in Mach3 and click on each Axis at the side and give us the Velocity and Accel numbers. Better still take a screen shot and post the pics.
Remember to Click on each axis in the side bar.
-
02-02-2015 #13
Swapped wiring over with y axis but problem remained
the bottom retaining bolt holding the motor to the threaded rod was a tad loose
i undone it and removed the motor and spacer. The bolts holding the sliding rails were also a tad loose. I tightened them up and tried it and it was much better
i re fastened all the bolts and am now doing a test cut
all seems good at the moment
thanks to you all
im making a key ring out of acrylic I've alllready made a coaster I will try and load up images later
thanks guys
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
FOR SALE: leewood 3 axis controller from an isel 3 axis cnc
By nobby in forum Items For SaleReplies: 1Last Post: 24-09-2014, 09:08 AM -
5-axis Breakout Includes Hand-Held Control Port & 3,4,5-axis Postion-Display Port
By LoveLearn in forum General ElectronicsReplies: 12Last Post: 25-05-2013, 12:41 AM -
NEW MEMBER: Goal - Enable 3-Axis CNC Bed Mill to Perform 5-Axis Milling
By LoveLearn in forum New Member IntroductionsReplies: 2Last Post: 25-01-2012, 08:46 PM -
Y axis is making X axis stall...!!
By fasteddy in forum Machine DiscussionReplies: 83Last Post: 24-10-2011, 12:19 PM -
Precision metal processing (3 axis, 5 axis, 7 axis) OEM
By 7AxisCNC in forum Manufacturer NewsReplies: 0Last Post: 17-05-2011, 02:04 PM
Bookmarks