hi guys
first of all im mainly using it for mdf,plastics and a bit of aluminium, so it will be mostly made of mdf, its based on the metalfusion design



so im looking to use the following

supported linear rails SBR16-300/600/1400mm rails(6 supported rails+12SBR16UU bearing blocks)
3pcs of ballscrews RM1605-300/650/1400mm total length-C7(3screws+3ballnuts+3end-machinings)
3 SETS OF BK/BF12(with locknuts and cir-clips)
3pcs of flexible couplings (6.35mm for the motor shaft)


for the stepper motor drivers i was looking to use these the cnc4you cw5045 would these be ok and what motors and breakout board would you think i would need

thanks for all you help

john