1. #1
    Hi, i have got a WATER-COOLED SPINDLE MOTOR 2.2KW INVERTER VFD 2.2KW VARIABLE FREQUENCY DRIVE q4 from China from ebay. both the cable that connects the motor to the spindle and the hydraulic pump are missing and the supplier said that it does not come with them. How would you operate the spindle without these items? The supplier does not seem to give me an answer. If I do need these items, do you know where i could get them? Any help would be extremely appreciated . Many Thanks

  2. #2
    its how they all come,you should have a connector that screws onto the top of your spindle but you will have to get your own cable and water hose.
    there are posts on here regarding wiring and set up somewhere.
    Last edited by deisel; 11-02-2015 at 03:04 PM.

  3. #3
    many thanks Deisel :)

  4. #4
    Quote Originally Posted by deisel View Post
    its how they all come,you should have a connector that screws onto the top of your spindle but you will have to get your own cable and water hose.
    there are posts on here regarding wiring and set up somewhere.
    http://www.mycncuk.com/threads/5814-...ce-More/page12 #6 gives some help with the setup ..Clive

  5. #5
    what would be the best water pump for this machine? I have seen that some users use quite powerful ones and others use quite small ones...which attachments does the pump need to have? does anyone have some links to show me examples? many thanks

  6. #6
    im just using a cheap 15-20 pond pump submerged in the water tank.get the correct clear water hose that fits the two unions on top of the spindle that came with it, run these two to your water tank.
    only one of the hose will fit to the pond pump the other just drops into you tank as a return.
    what ever pump you get you just need to source or make 1 reducer that steps down from the pumps connecter to the diameter of the spindle hose.

  7. The Following User Says Thank You to deisel For This Useful Post:


  8. #7
    thank you very much
    Quote Originally Posted by deisel View Post
    im just using a cheap 15-20 pond pump submerged in the water tank.get the correct clear water hose that fits the two unions on top of the spindle that came with it, run these two to your water tank.
    only one of the hose will fit to the pond pump the other just drops into you tank as a return.
    what ever pump you get you just need to source or make 1 reducer that steps down from the pumps connecter to the diameter of the spindle hose.

  9. #8
    Something like this will do http://www.ebay.co.uk/itm/1pc-Brand-...item233b53c288 put inside a Tupperware 2 ltr container. ..Clive

  10. The Following User Says Thank You to Clive S For This Useful Post:


  11. #9
    Quote Originally Posted by Clive S View Post
    Something like this will do http://www.ebay.co.uk/itm/1pc-Brand-...item233b53c288 put inside a Tupperware 2 ltr container. ..Clive
    thank you so much

Similar Threads

  1. Chinese 300W DC spindle - is the spindle shaft grounded?
    By HankMcSpank in forum Spindles & Drive Motors
    Replies: 44
    Last Post: 26-11-2016, 07:25 PM
  2. Chinese 6040 from uk eBay seller x axis problem
    By CommanderKenyon in forum Gantry/Router Machines & Building
    Replies: 4
    Last Post: 20-02-2015, 02:13 AM
  3. Chinese Nema 34 packages on ebay
    By adamh in forum Marketplace Discussion
    Replies: 4
    Last Post: 06-12-2013, 12:24 PM
  4. Replies: 112
    Last Post: 07-10-2013, 03:38 PM
  5. WANTED: Spindle holder for 1.5kw Chinese spindle.
    By jcb121 in forum Items Wanted
    Replies: 19
    Last Post: 14-10-2011, 02:07 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •