. .
  1. #1
    Hey, i want to build some small CNC, mainly to machine aluminium.
    Have leadshine drivers, nema23 steppers, gecko driver too. Hiwin rails, and 16 and 20mm ballscrews. Interested in use 20k 2.2kw spindle, to machine 4mm aluminium plates.

    Want some tips or point me to some design to build solid machine to at least let me machine max 40x40cm pieces.

    Was thinking that can be 40x25 or 40x30 too so can use an fixed gantry.

    Thanks in advance.
    Last edited by samsagaz; 28-02-2018 at 10:36 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. V Groove bit recommendation
    By etched4u in forum Tool & Tooling Technology
    Replies: 1
    Last Post: 06-06-2017, 01:09 PM
  2. Seek advice on which small quality router to buy/build ...
    By evalon in forum Gantry/Router Machines & Building
    Replies: 12
    Last Post: 06-02-2017, 08:06 AM
  3. Small Fixed Gantry Router Spec and Build
    By shaunrod in forum Gantry/Router Machines & Building
    Replies: 7
    Last Post: 29-07-2016, 06:55 PM
  4. BUILD LOG: Small scratch build 3 axiz CNC
    By bofred in forum DIY Router Build Logs
    Replies: 17
    Last Post: 08-04-2015, 06:58 PM
  5. Desktop size build to learn on - PCB routing / small MDF work.
    By dynamis_dk in forum Gantry/Router Machines & Building
    Replies: 10
    Last Post: 26-02-2014, 11:50 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •