. .
Page 6 of 6 FirstFirst ... 456
  1. #51
    I would get rid of that relay and fit a standard coil relay. I think that will solve your problem.

  2. #52
    You think so?

    This is my driver QS7AA020M

    http://www.adtechcnc.co.uk/wp-conten...rvo-Driver.pdf

  3. #53
    Yeah. Just wire it the same as you have it but with a standard relay.

  4. #54
    Ok I will give it a go cheers

  5. #55
    OK Guys ive managed to swap the rack and pinion for the rotating ballnuts, what would be the best way to works the steps per with this setup

    Ballscrew is 2020
    rotating nuts are 1:1 (2 x 30 tooth pulleys)

    Cheers

  6. #56
    Ok guys I need your help again! I bought a different machine and retrofitted the motors etc

    I need help with the steps per again everything is the same apart from the ballscrews I'm now running a 1-1 pulley (2x30 tooth) but I'm running an imperial pinion how would I calculate this? It's a TS2020 20

    Cheers in advance


    Sent from my iPhone using Tapatalk

Page 6 of 6 FirstFirst ... 456

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Eding CPU5A4E controller and Siemens G110 VFD.
    By calgone in forum EdingCNC (CPU5, CPU5A)
    Replies: 4
    Last Post: 06-02-2015, 11:31 PM
  2. FOR SALE: Various Steppers, servos, drives for sale
    By Peter. in forum Items For Sale
    Replies: 2
    Last Post: 02-02-2014, 09:56 PM
  3. Big single phase servos and drivers
    By m_c in forum Stepper & Servo Motors
    Replies: 0
    Last Post: 04-09-2013, 01:18 AM
  4. Open Source Servos
    By D.C. in forum Open Source Designs & Plans
    Replies: 0
    Last Post: 07-03-2013, 07:29 PM
  5. Mariss Freimanis Steppers vs Servos Advantages/Disadvantages of both
    By Lee Roberts in forum Stepper & Servo Motors
    Replies: 0
    Last Post: 02-10-2007, 09:08 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •