-
22-03-2015 #51
I would get rid of that relay and fit a standard coil relay. I think that will solve your problem.
-
22-03-2015 #52
You think so?
This is my driver QS7AA020M
http://www.adtechcnc.co.uk/wp-conten...rvo-Driver.pdf
-
22-03-2015 #53
Yeah. Just wire it the same as you have it but with a standard relay.
-
22-03-2015 #54
Ok I will give it a go cheers
-
08-08-2015 #55
OK Guys ive managed to swap the rack and pinion for the rotating ballnuts, what would be the best way to works the steps per with this setup
Ballscrew is 2020
rotating nuts are 1:1 (2 x 30 tooth pulleys)
Cheers
-
24-04-2016 #56
Ok guys I need your help again! I bought a different machine and retrofitted the motors etc
I need help with the steps per again everything is the same apart from the ballscrews I'm now running a 1-1 pulley (2x30 tooth) but I'm running an imperial pinion how would I calculate this? It's a TS2020 20
Cheers in advance
Sent from my iPhone using Tapatalk
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Eding CPU5A4E controller and Siemens G110 VFD.
By calgone in forum EdingCNC (CPU5, CPU5A)Replies: 4Last Post: 06-02-2015, 11:31 PM -
FOR SALE: Various Steppers, servos, drives for sale
By Peter. in forum Items For SaleReplies: 2Last Post: 02-02-2014, 09:56 PM -
Big single phase servos and drivers
By m_c in forum Stepper & Servo MotorsReplies: 0Last Post: 04-09-2013, 01:18 AM -
Open Source Servos
By D.C. in forum Open Source Designs & PlansReplies: 0Last Post: 07-03-2013, 07:29 PM -
Mariss Freimanis Steppers vs Servos Advantages/Disadvantages of both
By Lee Roberts in forum Stepper & Servo MotorsReplies: 0Last Post: 02-10-2007, 09:08 AM
Bookmarks