Hi guys, I've managed to pic one of these machines up, however I have a problem on the X axis and the x axis switch.

Everything else homes fine but when it comes to homing the x it makes a horrible noise as if it's doing single steps, also whilst its moving, if I press the home switch on the X it does not stop the machine.

My suspicions are that the person before me has tried to get it to work on Mach3 as it's installed on the machine with ports entered etc, unfortunatly it doesn't work on mach either.

I've done a quick video of the x axis homing, the first two thuds are the Z and y completing their homes sequence successfully however you will see and here tge X has a problem somewhere.

You can view the video here > http://youtu.be/Dudpb_M5XvQ