Hi Everybody.
Ive recently got my hands on an SPG 2217-111 this is an R8 Spindle similar to the Grizzly G0704 or the Amadeal AMA25.
When I bought it the lad I bought it of had made the motor mounts o convert iot to cnc.
I bought nerma 23s 4.7nm for the x and y axis and a Nema 34 8nm for the z axis.
Can anybody offer me some advie on what power supply to use and what motor controllers, there is loads of information around and from what I have read it say only to run the motors at 75% of the total current.
the 23s un at 4 amp max and the 34 at 6 amps max.
Im not nplanning to go full deep into with cnc Ive got arthritis and using the cnc or even motorised spindles to help to machine parts for 3.5" and 5" gauge steam and electric locomotives..


Cheers

Neil

http://www.southshields-weather.co.uk