Thread: Hello from Essex UK
Hello everyone, I have joined this group because I am very interested in converting a bench top Milling machine to CNC. I am still undecided as to which machine to purchase. I would like one with a dovetail column for positive head location when moving the Z axis. Any advice will be gratefully received.
I have a very small amount of experience in this area having acquired a CNC controlled engraving table with a non functioning control system a while back, I muddled my way through getting interfaced to a PC and working with Mach3.
All the Best
Hi Ivan What part of Essex?
(Us Colchestrians are a little snooty about being called Essex men, referring to it as North-East Essex or Essex/Suffolk boarder ;))
Stanford Le Hope, Essex.
Not much hope for you then mate.........
.John S -
04-06-2009 #5Not much hope for you then mate.........
Hi Ivan, don't let the 'northerners'* put you off; most of them are friendly, some even speak English.
* - Actually, there's a kiwi on the board somewhere, so I guess we're all northerners now :)
Stanford Le Hope ??
Not much hope ???
OK I'll get me coat.
.John S -
Hello John & Bill thank you for the welcome.
NEW MEMBER: hello from essexBy T0rnado69 in forum New Member IntroductionsReplies: 3Last Post: 19-03-2014, 11:13 PM
NEW MEMBER: Greetings From EssexBy trounce in forum New Member IntroductionsReplies: 1Last Post: 18-01-2011, 01:06 PM
NEW MEMBER: Hi from EssexBy baldric in forum New Member IntroductionsReplies: 1Last Post: 11-01-2011, 02:14 PM
NEW MEMBER: New member from EssexBy swarfy in forum New Member IntroductionsReplies: 1Last Post: 08-12-2010, 12:38 PM
NEW MEMBER: New Member - Essex UKBy alan2525 in forum New Member IntroductionsReplies: 1Last Post: 16-10-2007, 12:43 PM