. .
  1. #1
    A used 4 axis CNC foam cutting machine. This is the cut 2300S model made by CNC Multitool, purchased brand new from Germany. Great for cutting styrofoam which can be used to make airplane wings, 3D letters, logos, columns, packaging, furniture, and similar. The machine is currently configured as a hot wire cutter, but this could be replaced with a horizontal rail to create a mill.

    http://www.cnc-multitool.com/cnc/foa.../cut2000s.html
    http://web.archive.org/web/20140816191611/http://www.cnc-multitool.com/shopseiten/cnc-multitool/download/catalogs/cut2000s_man_uk.pdf

    Dimensions:
    Maximum Cutting area: 305cm (L) x 105cm (W) x 130cm (H)
    Maximum Frame size: 312cm (L) x 180cm (W) x 166cm (H)

    What is included:


    • Frame and with two independent linear carriages that move in the x and y directions
    • One turntable with stepper motor, another turntable without motor
    • Driver board for stepper motor
    • Hot wire
    • Frame Assembly Manual


    All the steppers motors are fully functioning, however in both the x direction of both rails there is a limited range of motion. The y direction works finds and the carriages traverse the whole length without jamming.

    What you need to add to get a fully working machine:


    • A Windows XP computer with a parallel port
    • Software to operate the machine, e.g. MAch3 or Foamworks,
    • Software to generate the 4 axis g code, e.g. deskCNC
    • An electric unit to heat the hot wire
    • New or straightened central threaded roads (these maybe the possible cause of the rail jam, however buyer will have to diagnose the exact problem themselves)


    Asking price is £1000. Collection only from Oval, London, weekdays from 9.30am-6.30pm. The middle section of the frame can be removed such that the two rail sections collapse down to an area occupying:

    100cm(L) x 190cm(W) x 166cm (H)

    If you have a large enough van so the two halves of the machine can be transported together, that would be the easiest collection solution. Alternatively you are welcome to come and disassemble the frame itself into smaller components (within our working hours), though this could take a couple of hours.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_1710.jpg 
Views:	2487 
Size:	324.5 KB 
ID:	15372   Click image for larger version. 

Name:	IMG_1711.jpg 
Views:	546 
Size:	159.0 KB 
ID:	15373   Click image for larger version. 

Name:	IMG_1712.jpg 
Views:	620 
Size:	301.8 KB 
ID:	15374   Click image for larger version. 

Name:	IMG_1713.jpg 
Views:	451 
Size:	222.6 KB 
ID:	15375   Click image for larger version. 

Name:	IMG_1714.jpg 
Views:	570 
Size:	159.2 KB 
ID:	15376   Click image for larger version. 

Name:	IMG_1716.jpg 
Views:	404 
Size:	285.8 KB 
ID:	15377   Click image for larger version. 

Name:	IMG_1717.jpg 
Views:	786 
Size:	135.7 KB 
ID:	15378   Click image for larger version. 

Name:	IMG_1719.JPG 
Views:	550 
Size:	356.4 KB 
ID:	15379   Click image for larger version. 

Name:	IMG_1720.JPG 
Views:	931 
Size:	370.8 KB 
ID:	15380  

  2. #2
    I have now sold this machine.

    Regards

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. foam cnc carver- deep z axis - 4x4 bed
    By marbles in forum Hotwire Cutting Machines
    Replies: 9
    Last Post: 17-05-2016, 09:20 AM
  2. Replies: 0
    Last Post: 18-09-2013, 05:28 AM
  3. Not cutting perfect right angles and sticking on Y axis ?
    By Fivetide in forum Milling Machines, Builds & Conversions
    Replies: 7
    Last Post: 10-12-2012, 09:41 PM
  4. Z axis not cutting to required depth
    By dinasblu in forum Machine Discussion
    Replies: 10
    Last Post: 02-07-2012, 05:38 PM
  5. Where to buy long ball nose mill for foam cutting?
    By jamezwarner in forum Marketplace Discussion
    Replies: 5
    Last Post: 10-05-2012, 02:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •