1. #1
    Hello, I'm hoping that someone may be able to help. We have recently purchased a 1990 Jobs Jo'mach 21 CNC machine. The machine did not come with any electrical specifications so we are slightly at a loss with completing some of the information for our electricity supplier in order for them to be able to up our supply voltage. We need to provide them with the rating or aggregate rating, starting power factor and maximum starting current. We have contacted Jobs who manufactured the machine but due to its age they don't have the information that we require, we have also contacted the two previous owners and various electrical contractors who have worked on the machine. If anyone is familiar with this machine or similar then any advice would be very welcome! Many thanks, Charlotte

  2. #2
    maybe that could help , there are some specs there
    project 1 , 2, Dust Shoe ...

Similar Threads

  1. Riveting pcb holes - engineering type input sought!
    By HankMcSpank in forum General Electronics
    Replies: 21
    Last Post: 21-04-2015, 04:44 PM
  2. Haunyang VFD input voltage
    By JamesUS in forum Spindles & Drive Motors
    Replies: 0
    Last Post: 18-01-2015, 07:25 PM
  3. Aluminum router build - Could use some input
    By Tumblebeer in forum Gantry/Router Machines & Building
    Replies: 17
    Last Post: 01-09-2014, 08:48 PM
  4. Stepper controller to manually input a specific degree
    By Web Goblin in forum Motor Drivers & Controllers
    Replies: 11
    Last Post: 13-10-2013, 04:47 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts