. .
  1. #1
    Hi everyone
    Please help
    I have an Avon 2200 cnc milling machine,with the Anilam series gxm control.
    I have a few questions which I hope you good people can answer for me


    Can anyone tell me if it is possible to connect and programme from a PC/laptop?
    If so what kind of budget and how simple is it to do for someone with not much knowledge of electrics/circuit boards etc
    I would really like to use something like Mach 3 or similar
    I need to do this on a budget and wonder if anyone has done this or similar or can point me in the right direction of someone who has
    Any help whatsoever with these issues would be greatly appreciated
    Cheers
    Bob


    Sent from my iPad

  2. #2
    http://www.cnczone.com/forums/bridge...eems-last.html

    You will have to do most probably:
    -keep the servos
    -rip out all else
    -fit new controller like CSMIO, most possibly the analogue version
    -fit new servo drives, Granite devices, CSMIO or whatever.

    cause if you dont have the post processor to drip feed, which means you can not send 3d jobs or longer than floppy disc jobs, you will need that processor, and maybe it costs same as what i said above, with the difference that the above is light years in the future compared to the original controls. When you last used floppy?
    project 1 , 2, Dust Shoe ...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Help Please! Advice needed on Avon CNC Turret Mill
    By steve400 in forum Milling Machines, Builds & Conversions
    Replies: 0
    Last Post: 15-09-2014, 12:05 PM
  2. NEW MEMBER: Help needed near Stratford-upon-Avon
    By JimmyJ in forum New Member Introductions
    Replies: 0
    Last Post: 26-05-2014, 07:13 PM
  3. WANTED: cnc milling machine
    By bigred5765 in forum Items Wanted
    Replies: 14
    Last Post: 25-04-2014, 11:08 PM
  4. WANTED: X3 CNC milling machine
    By Nemo1966 in forum Items Wanted
    Replies: 1
    Last Post: 09-11-2013, 10:42 PM
  5. AVON 2200 CNC VERTICAL MILL power requirements
    By hlnoob in forum Milling Machines, Builds & Conversions
    Replies: 1
    Last Post: 09-04-2013, 08:35 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •