Thread: Machine shop
I am a new ish member and I thought I should introduce my self, I own a machine shop just me at the moment I
have a DSG 13 x 30 manual lathe, Hitachi Seiki VMC 40II 30 ATC, bead blasting, mig welder and arc welder, we have work coming
in drips and drabs, anybody got any good ideas for things to manufacture, you can see some projects at www.jamakentgineeringltd.com
I do this on my days off not doing this full time yet not enough work, any comments would be appreciated, thanks.
Your link doesn't work for me ?
welcome to the forum!
Yours is the case where its on the server side the problem, cause shows same ip for both, so its not a DNS issue. Basically a configuration issue.
Originally Posted by JAMAK;70324[COLOR=#333333
So what is what you aim for? Partnership,just making parts,sponsoring a project, making a product, etc...?
Why are you referring to yourself as "we", i mean at the web site. May be you would be most trustworthy if you say I, so people will know they will get personal attention, not just some employee in a company.
I am sometimes "we" , but when i speak with people i say "I", so people know who exactly they are dealing with.
I tend to visit sites like tumblr and pinterest (search "DIY CNC") for a bit of inspiration - you can spend hours scrolling through a feed of custom made odds and sods, some of it really quite beautiful and considered. That normally gets the creative part of my mind ticking...
Welcome to the forum.
Last edited by Wal; 23-06-2015 at 08:03 PM. Reason: typo
Hi, welcome to the forum. Some years ago I used to buy silicone mould rubbers from a firm called JAMAK. As it is an unusual name I wondered if there is a connection? I think that firm was a husband and wife set up, which could easily explain the "we". Anyway as has already been stated sometimes having the ideas is the difficult part!!! Good luck with whatever you try. G.
Thanks everyone for your good wishes, it is a husband and wife set up at the moment but who knows what lies ahead in life, it was not us who did those silicon parts for you , but we have been going since 2007 on and off and we have gone in the CNC side now, this seems a really good forum.
You need to setup "www" as a "CNAME" record in your DNS manager, can't think why your current DNS provider doesn't just have this setup as a standard template for new accounts as it's one of the standards really.
I've attached a screen shot for you of the mycncuk.com domain DNS settings for clarity, I say above "You need" but there isn't a requirement to have a record setup for "www." but given how common it is to have one, I always do/would.
You don't have to tell people it's there but having it there is free and is a nice catch for those that still type www. in a browser.
Last edited by Lee Roberts; 24-06-2015 at 11:32 AM..Me
By gavztheouch in forum General DiscussionReplies: 3Last Post: 04-04-2014, 09:57 AM
By cnmachineshop in forum Manufacturer NewsReplies: 0Last Post: 06-03-2014, 05:53 AM
By newtoid1986 in forum General DiscussionReplies: 16Last Post: 04-10-2011, 09:35 PM
By newtoid1986 in forum Milling Machines, Builds & ConversionsReplies: 1Last Post: 05-09-2011, 09:47 PM
By irving2008 in forum Computer SoftwareReplies: 0Last Post: 14-02-2009, 08:59 PM