1. #1
    Hello everyone.

    I am looking to set up a small unit in my garage and looking for a small CNC machine to make prototypes from upto 6mm acrylic.

    The maximum size i will be working from is 400 x 400mm. Just need something that can cut out some shapes from a flat sheet and drill holes.


  2. #2
    SHYMAN, If you really never need to cut anything harder than plastics, then take a look at the '6040' range on ebay. I have a friend who has one of these tearing through abs box panels and he loves it. Its horses for courses, one of these machines may well do what you need it to do, but would fall down on heavier machine tasks.



  3. #3
    Thanks Dave

    Will have a look at this on ebay

Similar Threads

  1. New member looking for advice on a good quality machine (brand)
    By steve78 in forum Marketplace Discussion
    Replies: 1
    Last Post: 16-08-2014, 08:25 PM
  2. NEW MEMBER: New member seeking advice
    By Rob Wol in forum New Member Introductions
    Replies: 14
    Last Post: 02-02-2012, 09:54 PM
  3. NEW MEMBER: Hi From Leicester
    By andykett in forum New Member Introductions
    Replies: 1
    Last Post: 13-11-2010, 03:05 PM
  4. NEW MEMBER: Hi from Leicester
    By Normsthename in forum New Member Introductions
    Replies: 3
    Last Post: 24-06-2010, 12:03 AM
  5. NEW MEMBER: Hello from leicester
    By clarke78 in forum New Member Introductions
    Replies: 1
    Last Post: 20-03-2009, 01:48 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts