Thread: Boxford tlc 160 motor
Threaded View
-
16-07-2015 #1
Last Activity: 30-04-2020
I recently converted my Booxford160 to pc operation with a LOT of help from a forum member. I finally got it to work ok . So i put a job in the chuck that was an odd shape and went a bit too fast. The result was spectacular the machine vibrated that much the reversing contactor shorted and blew the rectifier in the speed controller with quite a big bang. I got a new reversing contactor quite cheap on e bay and the rectifier was quite easy to replace but all is not well with the motor. It sparks and smells so i stopped it . i tried a treadmill motor but it starts ok and then immediately stops . So does any body know how much it is to rewind the lenze 500 watt motor or has any body got one for sale.Any advice at all will be most helpful .thanks
Last edited by keith wainwright; 16-07-2015 at 08:52 PM.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
CONVERSION: Boxford TCL 160
By Saracen in forum Conversion Build LogsReplies: 38Last Post: 01-08-2021, 05:50 PM -
AC servo motor to replace a 3 phase induction motor on a mill spindle.
By rnr107 in forum Spindles & Drive MotorsReplies: 2Last Post: 23-04-2014, 03:14 PM -
Stepper Motor Driver - cheap similar to ArcEuro 4.2A Bi-Polar Stepper Motor Driver
By craynerd in forum Motor Drivers & ControllersReplies: 1Last Post: 16-03-2014, 07:29 PM -
servo motor as spindle motor
By Scott in forum General DiscussionReplies: 1Last Post: 03-10-2010, 06:42 PM
Bookmarks