Threaded View
-
28-07-2015 #1
Hi folks,
I want to do some engraving on some aluminum and brass tubing. I have the Hobby Lathe and my 3 axis cnc. I thought it may be simple just to add say
http://www.ebay.co.uk/itm/CNC-Engraving-Rotational-Rotary-Axis-50mm-chuck-3-jaw-4th-A-Axis-Tailstock-/251889999308?pt=LH_DefaultDomain_3&hash=item3aa5d0 5dcc
to the bed of the cnc and it looks like it plugs into the 5th axis plug on my controller, if it doesn't have a 5 axis board I'll use a redundant axis.
Has anyone had any experience with them.. any advice ?
Fiction is far more plausible when wrapped around a thread of truth
Nothing great was ever achieved without enthusiasm.
Ralph Waldo Emerson
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Sturdy Rotary Axis for CNC table
By Boyan Silyavski in forum Linear & Rotary MotionReplies: 7Last Post: 31-08-2014, 11:53 AM -
DIY Rotary Encoders?
By birchy in forum Electronic Project BuildingReplies: 3Last Post: 15-09-2013, 03:09 PM -
Diy 4th axis rotary table using 100mm chuck with minimal backlash
By kingcreaky in forum Linear & Rotary MotionReplies: 3Last Post: 05-09-2013, 01:03 PM -
Bearings(Rotary)
By GeorgeD in forum Linear & Rotary MotionReplies: 7Last Post: 14-08-2010, 05:50 PM -
RDG Tools (Rotary tables)
By Smiler in forum Tool & Tooling TechnologyReplies: 8Last Post: 16-12-2009, 11:32 PM
Bookmarks