1. #1

    I have just bought a 1997 Denford Triac VMC with toolchanger and Fanuc O-M control and a 2001 Cyclone with 21i control.
    They will be delivered this week and I wondered if anyone has a data sheet or information on how much power they will draw.
    This is the information from the plate on the machines...

    Voltage 415V F.L.C 30A 50Hz 3Ph

    Voltage 415V F.L.C 20A 50Hz 3Ph

    I can have some three phase isolators added to the workshop but the electrician need some clarification before doing any wiring.
    Just wondered if they will really draw that much power in normal working conditions.

    Hope someone can help, many thanks in advance

    Last edited by jamesgates1000; 03-08-2015 at 06:32 PM.

Similar Threads

  1. Renishaw Cyclone Series 2 For Sale
    By Anthm in forum Probing, Digitizing & Scaning
    Replies: 6
    Last Post: 22-04-2015, 12:09 PM
  2. Fanuc w3 paramaters
    By Ismirko in forum Machine Discussion
    Replies: 3
    Last Post: 03-02-2015, 07:29 PM
  3. Cyclone extraction
    By gorbo in forum Dust Extraction & Collection
    Replies: 7
    Last Post: 17-04-2014, 04:36 PM
  4. Replies: 0
    Last Post: 25-01-2012, 08:29 PM
  5. Fanuc, any one know this well, need pointers/help
    By fastcarl in forum Machine Control Software
    Replies: 2
    Last Post: 26-08-2011, 06:46 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts