. .

Thread: My Cnc build

Page 1 of 7 123 ... LastLast
  1. #1
    Here we go. It all started with an idea of approx 2ft x 3 ft bed and i had a nice space in my shed to put it. I watched ebay and bought a few bits and pieces and then it went all wrong in a good way
    My brothers factory was closing down and all the square tubing was FREE. and i also got two lengths of linear rail for cheap approx 2mtrs long followed by another two lengths off the same-ish length. so i had to build one to those dimensions...Honest
    The motors and gear i had was no good for that particular size so off to Zappautomation and i bought the full set of closed loop stepper motors including THC.

    Hopefully the following pictures will tell a thousand words and you also get deducted points for a tidy workshop, so i will not be expecting any deductions .

    Cheers Tommy.

  2. #2
    Should there be some photos attached Tommy? Or are they on the way
    Building a CNC machine to make a better one since 2010 . . .
    MK1 (1st photo), MK2, MK3, MK4

  3. #3
    They are on there way.just waited for my submission to be approved and need to do some reading about sizes etc...work tomorrow , so hopefully tomorrow night...
    Cheers Tommy

  4. #4
    Just replied and my name comes up fatty...must of joined with that name and not Skiprat...need to sort that out aswell...

  5. #5
    Hopefully tomorrow night as i now have had the thread approved if you know what i mean....and i need to sort out sizes of images etc...cheers Tommy

  6. #6
    Hello
    Hopefully tomorrow night as i now know thread is live and i will have to do some reading into image sizes etc.
    Cheers Tommy

  7. #7
    Here we go...some materials sort from all corners of my contacts...pictures may come in various times...some before others could be completed so this will hopefully sort out the confusion..
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20140809_153234.jpg 
Views:	1694 
Size:	164.2 KB 
ID:	15743   Click image for larger version. 

Name:	20140413_130312.jpg 
Views:	1697 
Size:	138.1 KB 
ID:	15744   Click image for larger version. 

Name:	20140809_153218.jpg 
Views:	1716 
Size:	258.6 KB 
ID:	15745   Click image for larger version. 

Name:	20140809_153226.jpg 
Views:	1702 
Size:	159.9 KB 
ID:	15746   Click image for larger version. 

Name:	20140809_160122.jpg 
Views:	1705 
Size:	307.1 KB 
ID:	15747   Click image for larger version. 

Name:	20140809_160128.jpg 
Views:	1717 
Size:	196.7 KB 
ID:	15748   Click image for larger version. 

Name:	20140809_160135.jpg 
Views:	1709 
Size:	212.6 KB 
ID:	15749  

  8. #8
    They were then cut, bent, welded and painted...to suit my memory plan
    ~
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20140118_161237.jpg 
Views:	193 
Size:	120.8 KB 
ID:	15754   Click image for larger version. 

Name:	20140118_161244.jpg 
Views:	1681 
Size:	239.0 KB 
ID:	15755   Click image for larger version. 

Name:	20140118_161316.jpg 
Views:	1661 
Size:	155.4 KB 
ID:	15756   Click image for larger version. 

Name:	20140118_161329-2.jpg 
Views:	1691 
Size:	315.7 KB 
ID:	15757   Click image for larger version. 

Name:	20140118_161335.jpg 
Views:	1659 
Size:	264.8 KB 
ID:	15758   Click image for larger version. 

Name:	20140118_161342.jpg 
Views:	1662 
Size:	180.6 KB 
ID:	15759  

  9. #9
    Some more...
    ~
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20140302_130740.jpg 
Views:	186 
Size:	129.4 KB 
ID:	15760   Click image for larger version. 

Name:	20140302_130800.jpg 
Views:	1621 
Size:	111.1 KB 
ID:	15761   Click image for larger version. 

Name:	20140418_125757.jpg 
Views:	1648 
Size:	121.2 KB 
ID:	15762   Click image for larger version. 

Name:	20140418_125806.jpg 
Views:	1640 
Size:	96.7 KB 
ID:	15763   Click image for larger version. 

Name:	20140418_171129.jpg 
Views:	1644 
Size:	160.8 KB 
ID:	15764   Click image for larger version. 

Name:	20140419_113709.jpg 
Views:	1648 
Size:	217.1 KB 
ID:	15765   Click image for larger version. 

Name:	20141026_154050.jpg 
Views:	1684 
Size:	288.7 KB 
ID:	15766   Click image for larger version. 

Name:	20141026_154105.jpg 
Views:	1677 
Size:	280.6 KB 
ID:	15767  

  10. #10
    Some more with paint pre-fitment etc...
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20140303_101256.jpg 
Views:	1609 
Size:	417.1 KB 
ID:	15768   Click image for larger version. 

Name:	20140303_101313.jpg 
Views:	1589 
Size:	148.1 KB 
ID:	15769   Click image for larger version. 

Name:	20140303_101349.jpg 
Views:	1589 
Size:	145.1 KB 
ID:	15770   Click image for larger version. 

Name:	20140303_102556.jpg 
Views:	1575 
Size:	107.1 KB 
ID:	15771   Click image for larger version. 

Name:	20140303_102603.jpg 
Views:	1586 
Size:	159.9 KB 
ID:	15772   Click image for larger version. 

Name:	20140303_102612.jpg 
Views:	1581 
Size:	358.3 KB 
ID:	15773  

Page 1 of 7 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BUILD LOG: a Steel Box Section Build with SBR20 & Ballscrews Plus a few questions
    By grain_r in forum DIY Router Build Logs
    Replies: 130
    Last Post: 27-01-2023, 06:47 PM
  2. BUILD LOG: New Build - For Your Amusement - MK-2 build
    By Karl in forum DIY Router Build Logs
    Replies: 12
    Last Post: 08-02-2017, 08:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •