. .
  1. #1
    Hello all,

    Bought a Miyano MTV-T350 a couple of months ago, just waiting for an electrician to return from holiday to wire it in for me and I'll be up and running with the first machine I've bought.....hopefully.
    First few years in engineering were spent doing injection mould tools (MH, Bognor), then turned to motorsport. Currently a composite tool designer, but spent the first 7 years here machining all manner of terribly abrasive materials using 3/3+2/5 ax simultaneous. Use Vero-Visi for modelling and programming, dipping a toe into Catia recently. Also run the 3d printers we have but that's a walk in the park compared to machining in reality.
    Intend on just doing bits and pieces for friends really, no real goals I suppose!
    The Miyano uses a Yasnac J100m control, which seems to use programs identical to standard Fanucs. Hopefully. I bought this because at the toolmaking place we had a Fanuc Robodrill which I adored and this seems very similar in spec outwardly. 48M/min, 12k spindle (rebuilt a couple of years ago), 500x480x250. Hopefully good enough to do some 3d bits and bobs

  2. #2
    Hello
    any new experience with miyano?
    i have also miyano same type but with 16 tolls and 16k spindle, 3 axis.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEW MEMBER: new member in west cumbria
    By chris in forum New Member Introductions
    Replies: 3
    Last Post: 28-11-2013, 09:16 AM
  2. Machine Shop Manager - (West Sussex)
    By Simon@Alecto_Recruitment in forum Opportunities Available & Sought
    Replies: 0
    Last Post: 04-01-2013, 06:13 PM
  3. NEW MEMBER: New Member from the West Midlands
    By biketrialsdave in forum New Member Introductions
    Replies: 16
    Last Post: 02-01-2013, 08:00 PM
  4. NEW MEMBER: Hi from Crawley, West Sussex
    By jrob3rts in forum New Member Introductions
    Replies: 2
    Last Post: 17-09-2010, 10:37 PM
  5. NEW MEMBER: Hi from West Sussex
    By pequod in forum New Member Introductions
    Replies: 4
    Last Post: 28-06-2009, 02:33 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •