Threaded View
-
20-08-2015 #11
That's right :) They will be supported at intervals. That's because they are integrated in the design. There is no efficient way to plasma cut full support profiles. Or you would need to cut the profile from lets say 20mm steel and stack all the supports next to each other, but that's just too much of a pain and would lead to alignment inaccuracy.
Supporting them at intervals won't cause binding of the 20mm plain stainless steel shaft, considering that the interval length stays reasonable. Current interval is 220mm on Y axis and 240mm on Z axis.Last edited by eurikain; 20-08-2015 at 01:46 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Welding 5-8mm steel box-section tubes
By techcobweb in forum Welding, Brazing & EquipmentReplies: 9Last Post: 17-07-2018, 05:53 PM -
Welding bench
By Boyan Silyavski in forum Metalwork Project ShowcaseReplies: 4Last Post: 12-07-2015, 05:01 PM -
RFQ: RFQ TIG welding
By Robin Hewitt in forum Projects, Jobs & RequestsReplies: 9Last Post: 01-02-2013, 10:41 PM -
Welding Consumables
By GTJim in forum Welding, Brazing & EquipmentReplies: 5Last Post: 13-12-2012, 01:33 PM -
TIG welding
By Robin Hewitt in forum Welding, Brazing & EquipmentReplies: 2Last Post: 03-04-2012, 10:38 PM
Bookmarks