. .
  1. #1
    anasonic minas a4 200w motors, 'I think 60mm bolt holes to squares
    to an isel fb2


    motors foot is 6-7mm

    any suggestions ??

    I am in London
    I have some 15mm aluminium plate

    would like them sexied up if possible on the lower plate, maybe cove bit what ever that's called and knock the edges off

    oops, just ordered the motor couplings 11mm to 1/4 and could only get them 42mm long
    so the lower plate needs to be 20mm - I have some of that too.

    I can't slow my motor down enough - don't know what bit to use.
    don't know depth per pass
    don't know the grade of allominoominoom I have
    can't sexy them up with cove and 45 knocks

    take 3
    just two 20mm plates now, found some smaller couplers
    Last edited by nobby; 31-08-2015 at 04:13 PM.

  2. #2
    ok so...
    basically motor mounts to take a 200w Panasonic minas a4 motor onto a isel techno fb2
    or a davinci

    prices please

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. RFQ: Ballnut Mounts needed.
    By dudz in forum Projects, Jobs & Requests
    Replies: 1
    Last Post: 05-03-2014, 09:01 AM
  2. Replies: 38
    Last Post: 31-12-2012, 02:42 PM
  3. RFQ: Nema 23 motor mounts
    By luke11cnc in forum Projects, Jobs & Requests
    Replies: 14
    Last Post: 06-10-2011, 02:21 PM
  4. FOR SALE: MDF NEMA 23 Motor mounts
    By Tom in forum Items For Sale
    Replies: 40
    Last Post: 21-08-2010, 01:23 AM
  5. DIY Nema23 Motor Mounts
    By Lee Roberts in forum Gantry/Router Machines & Building
    Replies: 5
    Last Post: 23-08-2009, 06:08 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •