Thread: New build stepper help
Threaded View
-
22-09-2015 #1
New build, and new to building!
I have my three steppers working, But not smoothly. In fact they sound like they are driving on a cobbled street.
They components are pretty standard stuff, so hoping someone will be able to point me in the direction of a solution:-
Longs steppers 23HS 9442`s, Longs drivers DM542A (dippers 1 thro 4 off, 5 thro 8 on)
Standard Chinese 5 axis bob.
Mach3 P&P drives are Enabled. Dir.low active ticked and Step low active ticked.
Mach3 Motor tuning :- Steps 400 Vel. 3000 Acc. 600 - 0 step pulse & 0 dir pulse.
I hope it is something fundamental, but having lost two days experimenting. I really would appreciate some help if poss.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: a Steel Box Section Build with SBR20 & Ballscrews Plus a few questions
By grain_r in forum DIY Router Build LogsReplies: 130Last Post: 27-01-2023, 06:47 PM -
BUILD LOG: New Build - For Your Amusement - MK-2 build
By Karl in forum DIY Router Build LogsReplies: 12Last Post: 08-02-2017, 08:03 PM -
How do I wire a stepper driver to a stepper motor?
By swood1 in forum Stepper & Servo MotorsReplies: 7Last Post: 21-09-2014, 05:40 PM -
Stepper Motor Driver - cheap similar to ArcEuro 4.2A Bi-Polar Stepper Motor Driver
By craynerd in forum Motor Drivers & ControllersReplies: 1Last Post: 16-03-2014, 07:29 PM -
Closed Loop Stepper Compared with Open Loop Stepper
By Leadshine-Erci in forum Stepper & Servo MotorsReplies: 0Last Post: 25-05-2012, 08:11 AM
Bookmarks