Rather than take the List of CAD/CAM Software thread off topic I thought I'd post this video of a test in plywood I ran this afternoon just to see if there were any "funnies" in the GCode Fusion 360 produces:
If you view very shortly after I post this the video may still be processing so no HD for a little bit until YouTube catches up.
The strategy was a little slower than expected, but whilst this video was uploading I did some GWizard Feeds and Speeds tweaking and re-ran the routine and tried it out in 6082 Aluminium (the part is a VESA 100 monitor adapter/mount) - it was very impressive, but that will come in the next video in my Sim Cockpit building series in a day or so. In fact it was awesome - I'm still a little buzzing from the results and have never cut or cleared aluminium like this beforeMy CNC Projects: https://www.youtube.com/playlist?lis...7_1sygWRSIBh_a
By Leadhead in forum Fusion 360Replies: 5Last Post: 24-06-2015, 10:31 PM
By grunt-will in forum Items For SaleReplies: 8Last Post: 14-07-2014, 07:30 PM
By hoezap in forum Mazak, Yamazaki MachinesReplies: 2Last Post: 19-05-2013, 08:59 PM
By bruce_miranda in forum Sieg Milling MachinesReplies: 12Last Post: 19-09-2008, 12:43 PM